@article { author = {Egdernezhad, Aslan and EbrahimiPak, Niaz Ali and Tafteh, Arash and Ahmadee, Mohsen}, title = {Canola Irrigation Scheduling using AquaCrop Model in Qazvin Plain}, journal = {Water Management in Agriculture}, volume = {5}, number = {2}, pages = {53-64}, year = {2019}, publisher = {Iranian Irrigation and Drainage Association}, issn = {2476-4531}, eissn = {2676-4369}, doi = {}, abstract = {Irrigation planning caused to achieve high crop yield and economic benefit. Regarding that, AquaCrop model was used to determine canola irrigation scheduling. At first, optimum depth of irrigation (Iw) and irrigation depth for maximum yield (Im) were determined. Then, these two irrigation depth (Iw and Im) were used to simulate 12 scenarios (T1-T12) for each Im and Iw using calibrated AquaCrop model. The results showed that Im and Iw were 53 and 45 cm, respectively. The highest values for yield and biomass in both Iw (2432 ton.ha-1) and Im (2496 ton.ha-1) irrigation depths were obtained in scenario FI. The highest WUE values using Im were obtained for T8, T11, and T6 as 0.65, 0.63, and 0.58 kg.m-3, respectively. For Iw irrigation depth, the highest WUE values were obtained for T11, FI, and T8 as 0.33, 0.37, and 0.38 kg.m-3, respectively. To put in nutshell, Treatments T8, T11 and T6 are recommended for achieving high WUE and acceptable yield (1832, 1566, 1876 ton.ha-1 using Im and 1264, 1169 and 1189 ton.ha-1 using Iw) in this region.  }, keywords = {Crop Modeling,Cut-off Irrigation,Irrigation management,Optimum Depth of Irrigation}, title_fa = {برنامه‌ریزی آبیاری کلزا با استفاده از مدل AquaCrop در دشت قزوین}, abstract_fa = {برنامه‌ریزی آبیاری بهینه می‌تواند به عملکرد مناسب و سود مکفی کمک نماید. بدین منظور، برای برنامه‌ریزی آبیاری گیاه کلزا، از مدل AquaCrop استفاده شد. در ابتدا مقادیر بهینه آب آبیاری برای حصول بیشترین عملکرد (Im) و سود اقتصادی (Iw) تعیین شدند. سپس با استفاده از این مقادیر، دوازده سناریوی مختلف کم‌آبیاری (T12-T1) برای هر کدام از مقادیر Im و Iw توسط مدل واسنجی شده‌ی AquaCrop شبیه‌سازی شد. نتایج نشان داد که مقادیر Im و Iw به ترتیب برابر با 53 و 45 سانتی‌متر بود. بیشترین عملکرد در تیمار آبیاری کامل (FI) برای هر دو مقدار Iw (2432 تن بر هکتار) و Im (2496 تن بر هکتار) به دست آمد. بالاترین کارایی مصرف آب با کاربرد Im در تیمارهای T8، T11 و T6 به ترتیب با مقادیر 65/0، 63/0 و 58/0 کیلوگرم بر مترمکعب به دست آمد. در عمق Iw، بالاترین کارایی مصرف آب برابر با 33/0، 37/0 و 38/0 مترمکعب بر ثانیه به دست آمد. براساس این نتایج، تیمارهای T8، T11 و T6 به دلیل کارایی مصرف آب بالا و عملکرد قابل‌قبول (به ترتیب با 1832، 1566 و 1876 تن بر هکتار در آبیاری با Im و 1264، 1169 و 1189 تن بر هکتار در آبیاری با Iw) توصیه می‌شوند.}, keywords_fa = {عمق بهینه آب آبیاری,قطع آب آبیاری,مدل‌سازی گیاهی,مدیریت آبیاری}, url = {https://wmaj.iaid.ir/article_93188.html}, eprint = {https://wmaj.iaid.ir/article_93188_d2f73d265ddde9ec4f09466425c71b81.pdf} }