@article { author = {Jafari, masoumeh and Nazari, Bijan and Sotoude niya, Abbas and Hadi, Ramezani Etedali, and Javani, HamidReza}, title = {SaltMod model performance in simulating water level, volume and salinity of drainage in free and controlled drainage}, journal = {Water Management in Agriculture}, volume = {8}, number = {1}, pages = {31-46}, year = {2021}, publisher = {Iranian Irrigation and Drainage Association}, issn = {2476-4531}, eissn = {2676-4369}, doi = {}, abstract = {Drainage systems are used to control soil and water salinity, which requires time and money to know. Drainage simulation models can be used to save cost and time. The present study evaluated the performance of the SaltMod model in simulating the water table, volume and salinity of the drain. Simulations were performed for three important crops of Moghan plain (wheat, barley and corn) and three treatments of FD, CD70 and CDch. To evaluate the controlled drainage in the model, the drainage control coefficient (Frd) was considered. FD treatments for calibration, CD70 and CDch treatments were selected for validation. After simulation, the degree of correspondence between the real and simulated values ​​was checked. In water table simulation, the mean RE for wheat, barley and corn was 17.3, 11.3 and 11% and the mean RMSE was 0.13, 0.07 and 0.07, respectively. The same indices were obtained for drainage volume of 16, 22 and 17% as well as 0.05, 0.07 and 0.06. These results confirm the acceptable accuracy of the model. Then the model was used to investigate the effect of drainage control factor, irrigation water depth and drainage installation depth on water table, volume and salinity of the drain. Therefore, the model can simulate different irrigation and drainage managements in Moghan plain.}, keywords = {Controlled drainage,Drainage control coefficient simulation,Moghan Plain,SaltMod}, title_fa = {عملکرد مدل SaltMod در شبیه‌سازی سطح ایستابی، حجم و شوری زهاب در زهکشی آزاد و کنترل شده}, abstract_fa = {برای کنترل شوری آب‌وخاک از سامانه­های زهکشی استفاده می­شود که شناخت آن‌ها نیازمند صرف وقت و هزینه است. برای صرفه­جویی در هزینه و زمان می­توان مدل­های شبیه­سازی زهکشی را بکار برد. پژوهش حاضر، عملکرد مدل SaltMod در شبیه­سازی سطح ایستابی، حجم و شوری زهاب را ارزیابی نمود. شبیه­سازی برای سه محصول مهم دشت مغان (گندم، جو و ذرت) و سه تیمار FD، CD70 و CDch انجام شد. برای بررسی زهکشی کنترل‌شده در مدل، ضریب کنترل زهکشی (Frd) لحاظ شد. تیمار FD برای کالیبراسیون، تیمارهای CD70 و CDch برای اعتبار­سنجی انتخاب شدند. پس از شبیه­سازی، میزان مطابقت میان مقادیر واقعی و شبیه­سازی­شده بررسی شد. در شبیه­سازی سطح ایستابی، میانگین RE برای گندم، جو و ذرت به ترتیب 3/17، 3/11 و 11 درصد و میانگین RMSE 13/0، 07/0 و 07/0 به دست آمد. همین شاخص­ها برای حجم زهاب 16، 22 و 17 درصد و همچنین 05/0، 07/0 و 06/0 حاصل شد. این نتایج، دقت قابل‌قبول مدل را تائید می­نماید. سپس از مدل برای بررسی تأثیر عامل کنترل زهکشی، عمق آب آبیاری و عمق نصب زهکش بر سطح ایستابی، حجم و شوری زهاب استفاده گردید؛ بنابراین مدل می­تواند مدیریت­های مختلف آبیاری و زهکشی را در دشت مغان شبیه­سازی نماید.}, keywords_fa = {دشت مغان,زهکشی کنترل شده,شبیه‌سازی ضریب کنترل زهکشی,SaltMod}, url = {https://wmaj.iaid.ir/article_130518.html}, eprint = {https://wmaj.iaid.ir/article_130518_3829e765fa50580d3e780a77174b56f5.pdf} }